-Afra, E., 2007. Principles of paper properties. Aeej press, Tehran. 360p.
-Akbari, M., Kaboodi, N., Torabi, H., Asadpour, Gh. and Dehghani firoozabadi, M.R., 2015. Improving the printing and writing paper properties using PCC filler modified by cationic starch. Iranian Journal of Wood and Paper Science Research, 29(4): 515-525.
-Antunes, E., Garcia, F.A.P., Ferreira, P. and Rasteiro, M.G. 2008. Flocculation of PCC filler in papermaking: Influence of the particle characteristics. Chemical Engineering Research and Design, 86(10): 1155-1160.
-Asadpour, GH., 2012. Investigation of using colloidal silica nanoparticles and CMP cationic fiber fines on fillers retention and properties of pulp and paper improvement. Ph.D. thesis. University of Agriculture and Natural Resources of Gorgan, 250p.
-Bagherzadeh, F., 2013. Determining the optimal consumption of fillers (china clay and GCC) in the fluting papers that produced from mixture of NSSC and OCC pulps with maintaining strength properties. M.Sc., thesis. University of sari agriculture and natural resources.
-Barzan, A., 1997. Investigation of the application of waste paper packaging in fluting paper production in Mazandaran wood & paper industries. M.SC thesis. Tarbiat moddares University. 95.
-Barzan, A., Resalaty, H., and Asadpour atoei Gh. 2015. Study of using water softening process byproduct, calcium carbonate on fine paper production. Iranian Journal of Wood and Paper Science Research, 30(1):1-25.
-Biermann C.J., 1996. Handbook of Pulping and Papermaking Second Edition. Academic Press Ltd., London, England.
-Christopher, J., 2007. Chemistry Paper. Aeej press, Theran. 240p.
-Ebrahimi, M., 2011. Investigation of mineral fillers retention on strength and optical properties of CMP pulp. M.Sc. thesis. University of shahid beheshti.
-Forozande sharaki, K., 2003. The principle of water treatment and purification. payame-noor press.424p. (In Persian)
-Gentile, E. 2003. Clays as fillers and coatings for paper. Presented at euro clays workshop, European clay minerals group meeting, Modena, Italy, June.
-Hamzeh, Y. and Rostampour Haftkhani, A., 2009. Principals of papermaking chemistry. Tehran university press, 424 p. (In Persian).
-Hemmasi, A.h., 2005. Application of Biotechnology in Pulp and Paper Industry. JOURNAL OF AGRICULTURAL SCIENCES Islamic Azad University, 11(1): 105-119.
-Kasmani J., Samariha A. and Nemati M. (2014). Effect of Mixing Different Contents of OCC Pulp on NSSC Pulp Strength. Bio Resources, 9(3), 5480-5487pp.
-Linen, C., Booth, G. 1990. Paper matters. Uk: paper publication.
-Lopes Velho, J., 2002. How Mineral Fillers Influence Paper Properties: Some Guidelines, Iberoamerican Congress on Pulp and paper Research.
-Lumianen, J., 2000. Refining of chemical of chemical pulp In: Gullichsen, J. and Paula Puro, H., (Eds), Paper making science and technology. Book & Fapet Oy. Jyvaskyla, Finland.
-Mehrabi, E., Resalati, H., and Mohamadzade, K. 2015. Investigation on Effect of Using Precipitated Calcium Carbonate on Paper Properties Made from CMP and Wood-Free Pulp Furnish. 22 (2): 1-17.
-Mohammadzade Saghavaz, K. Resalati, H. and Mehrabi, E., 2014. Jornal of Wood & Forest Science and Technology, Vol. 21 (2): 133-147.
-Nicu. r., bobu, e., Desbrieres , j ., 2010. Chitosan Cationic Polyelectrolyte in Wet-end papermaking systems. Cellulose Chemistry and Technology J., 10, 102-108pp.
-Norell, M., Johansson, K., and Persson, M., 2000. Papermaking Science and Technology, Book 4, Papermaking Chemistry, Chapter 3, Retention and Drainage, Finland, Fapetoy.Scott, W.E., 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, Tappi Press, 1-4 pp
-Scott, W.E. 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, TAPPI Press, 1-4 pp.
-Smoke, G., 2002. Pulp and Paper Technology. Aeej press, Tehran. 160p.
)