- Doosthoseini, K., 2001. Wood Composite Materials Manufacturing, Applications. Tehran university press, 648p.
- Dziurka, D., Mirski, R. and Łęcka, J., 2005. Properties of boards manufactured from rape straw depending on the type of the binding agent. Cellulose, 37: 54-09.
- Dziurka, D., Mirski, R. and Łęcka, J., 2010. Rape straw as a substitute of chips in core layers of particleboards resinated with PMDI. Electronic Journal of Polish Agricultural Universities, 13(4).
- Emam, M., 1997. The effect of mat and press conditions on the heat transfer. MSc. Thesis. wood and paper faculty. Natural resources and agriculture science Gorgan university. 127p.
- EN 310. 1993. Wood based panels, determination of modulus of elasticity in bending and bending strength. European Standardization Committee. Brussells.
- EN 317. 1993. Particle boards and fiber boards, determination of swelling in thickness after immersion. European Standardization Committee. Brussells.
- EN 319. 1993. Particle boards and fiber boards, determination of tensile strength perpendicular to plane of the board. European Standardization Committee. Brussells.
- EN 326-1. 1993. Wood based panels, Sampling, cutting and inspection. Sampling and cutting of test pieces and expression of the test results. European Standardization Committee. Brussells
- Guler, C., Bektas, I. and Kalaycioglu, H., 2006. The experimental particleboard manufacture from sunflower stalks (Helianthus annuus L.) and Calabrian pine (Pinus brutia Ten.). Forest Products Journal. 56(4): 56-60.
- Habibi, M., Hosseinkhani, H., Mahdavi, S. and Sepidehdam, J., 2011. Effect of wood species on particleboard properties, Iranian Journal of Wood and Paper Science Research. 26(1): 58-71.
- Habibi, M., Hosseinkhani, H. and Mahdavi, S., 2012. The potential of Mesquite wood in particleboard production. Iranian Journalof Wood and Paper Science Research. 27(1): 51-67.
- Habibi, M., Hosseinkhani, H., Mahdavi, S. and Rezanejad, A., 2013. Utilization of Hemp straw in particleboard industry. Final research project report. Research Division of Wood Science and Forest Products. Research Institute of Forests and Rangelads, 62p.
- Habibi, M. and Mahdavi, S., 2016. The effect of wood and nonwood materials mixing ratio on physical properties and internal bond of particleboard. Knowledge and Innovation Conference on Wood and Paper Industry with Environmental Considerations. Faculty of natural resource. Karaj-Iran:1-6.
- Kalaycıoglu, H. and Nemli, G., 2006. Producing composite particleboard from kenaf (Hibiscus cannabinus L.) stalks. Industrial crops and products, 24(2): 177-180.
- Kamrani, A., yadolahi, s., Kamrani, M., Saraeyan, A. and Lotfi, F., 2016. Investigating the possibility of using rice husk in the particleboard industry. Journal of Renewable Natural Resources Research. 21(1): 95-104.
- Guntekin, E., Uner, B., Sahin, H. T. and Karakus, B., 2008. Pepper stalks (Capsicum annuum) as raw material for particleboard manufacturing. Journal of Applied Sciences. 8(12): 2333-2336.
- Li, X., Cai, Z., Winandy, J. E. and Basta, A.H., 2010. Selected properties of particleboard panels manufactured from rice straws of different geometries. Bioresource Technology, 101(12): 4662-4666.
- Maloney, T. M. 1993. Modern particle board and dry-process fiber board manufacturing, Miller Freeman Publications, San Francisco, CA.
- Mirski, R., Boruszewski, P., Trociński, A., and Dziurka, D., 2017. The Possibility to Use Long Fibres from Fast Growing Hemp (Cannabis sativa L.) for the Production of Boards for the Building and Furniture Industry. BioResources, 12(2): 3521-3529.
- Nikvash, N., Kraft, R., Kharazipour, A. and Euring, M., 2010. Comparative properties of bagasse, canola and hemp particle boards. European Journal of Wood and Wood Products, 68(3): 323-327.
- Rassam, G., Azadifard, M., Kargarfard, A. and Fazeli, F., 2014. Investigation the possibility of particleboard manufacture using corn stalks. , Iranian Journal of Wood and Paper Science Research. 28(4): 609-623.
- Shamsi, S. and Vatani, L., 2016. The requirements of wood and paper industry to wood supply and raw material according to applying changes on forest harvesting. Knowledge and Innovation Conference on Wood and Paper Industry with Environmental Considerations. Faculty of natural resource. Karaj-Iran, 1-9.
- Suchland. O. and Xu, H., 1989. A simulation of the horizontal density distribution in a flake board. Forest Product Journal. 39(5): 29-33.
)