-Avinc, O. and Khoddami, A., 2009. Overview of poly (lactic acid) (PLA) fibre Part I: Production, properties, performanse, environmental impact, and end-use applications of poly(lactic acid)fibres, Fibre.Chem., 41,391-401.
-Biazyat, A., Jamalirad, L., Aminian, H. and Hedjazi, S., 2016. The effect of using palm wood flour in the manufacture of polypropylene-based wood plastic composite. Iranian Journal of Wood and Paper Science Research. 31:1. 30-39.
-Bleach N., Tanner K., Kellomäki M. and Törmälä, P., 2001. Effect of filler type on the mechanical properties of self-reinforced polylactide–calcium phosphate composites. J. Mater. Sci. Mater. Med,12: 911-915.
-Gholizadeh, M., Jamalirad, L., Aminian, H. and Hedjazi, S., 2015. Investigation on mechanical properties of polypropylene composite reinforced with tobacco stalk. Journal of Forest and Wood Products, 68 (2): 261-272.
-Kargarfard, A., 2013. The Infuence of coupling agent and the content of fibers on tensile strength and physical properties of cotton fiber stem/recycled polypropylene composites. Iranian Journal of Wood and Paper Industries, 3(2):131-140.
-Kim, S., Moonb, J., Kim, C.H. and Sikha, G., 2008. Mechanical properties of polypropylene /naturalfiber composites: Comparison of wood fiber and cotton fiber. Polymer Testing, 27:801–806.
-Oksman, K., Skrifvars, M. and Selin, J.F., 2003. Natural fibres as reinforcement in polylactic acid (PLA) composites. Composites Science and Technology, 63:1317–1324.
-Ouchi T. and Ohya Y., 2004. Design of lactide copolymers as biomaterials. J.polym. sci. part A:Polym. Chem., 42,453-462.
-Peltola, H., Pääkkönen, E., Jetsu, P. and Heinemann, S., 2014. Wood based PLA and PP composites: Effect of fiber type and matrix polymer on fiber morphology, dispersion, and composite properties. Composites: Part A, 61: 13-22.
-Rasam Gh. rangavar, H., Alignment, H. and Taheri, O. A., 2011. Investigating the possibility of using sunflower stem in the production of particleboard. Journal of Iranian Wood and Paper Industries, 2 (2).
-Sawada, K. and Ueda M., 2007. Optimization of dyeing poly (lactic acid) fibers with vat dyes. Dyes and Pigments, 74(1), 81-84.
-Shibata, M., Oyamada, s., Kobayashi, S. and Yaginuma, D., 2004. Mechanical properties and biodegradability of green composites based on biodegradable polyesters and lyocell fabric. Journal Applied Polymer Science, 92: 3857-3863.
-Shibata, M., Ozawa, K., Teramoto, N., Yosomiya, R. and Takeishi, H., 2003. Biocomposites made from short Abaca fiber and biodegradable polyesters. Macromol Material Engineering, 288: 35-43.
-Shubhra, Q., Alam, A. and Quaiyyum, M.A., 2011. Mechanical properties of polypropylene composites. Journal of Thermoplastic Composite Material, 26(3):362-391.
-Tsuji, H., Ishida, T. and Fukuda, N., 2003. Surface hydrophilicity and enzymatic hydrolyzability of biodegradable polyesters: 1. Effects of alkaline treatment. Polymer, 52, 843-852.
-Vink, E.T., Rabago, K.R., Glassner, D.A. and Gruber, P.R., 2003. Applications of life cycle assessment to nature works™ polylactide (PLA) production. Polym. Degrad. Stabil, 80: 403-419.
-Zini, E., Baiardo, M., Armelao, L. and Scandola, M., 2004. Biodegradable polyesters reinforced with surface-modified vegetable fibers. Macromol Bioscience, 4: 286-295.
)