-Barazandeh, M.M., Hosseinkhani, H., Eshaghi, S. and Fakhrian, A., 2013. Evaluation of formaldehyde emissions from composite wood products, Iranian Journal of Wood and Paper Science Research, 28 (2): 197-204.
-Boran S., Usta M., Gumuskaya E., 2011. Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin, International Journal of Adhesion & Adhesive, 31: 674-678.
-Chen, T., Dou, H.Y., Li, X.L., Tang, X.F; Li, J.H. and Hao, J.M., 2009. Tunnel structure effect of manganese oxides in complete oxidation of formaldehyde. Microporous and Mesoporous Materials, 122: 270-274.
-Darmawan, S., Sofyan, K., Pari, G. and Sugiyanto, K., 2010. Effect of activated charcoal addition on formaldehyde emission of medium density fiberboard. Journal of Forestry Research, 2: 100-111.
-Deshpande, A. and LeRoy, B.J., 2012. Scanning probe microscopy of graphene. Physica, E44: 743–759.
-Dosthosseini, K., 2007. Wood Comosite Materials. Tehran University Publication (2487), Iran, 708p.
-Dunky, M., 1998. Urea–formaldehyde (UF) adhesive resins for wood. International Journal of Adhesion and Adhesives, 18(2): 95-107.
-EN 310 Standard. 1993. Wood Based Panel. Department of Modulus of Elasticity in Bending and Bending Strength, European Committee for Standardization, Brussels, Belgium.
-EN 317 Standard. 1993. Particleboard and Fiberboards. Determination of Swelling in Thickness after Immersion in Water, European Committee for Standardization, Brussels, Belgium.
-EN 319. 1993. Determination of Tensile Strength Perpendicular to the Plane of the Board, European Committee for Standardization, Brussels, Belgium.
-EN 323 Standard. 1999. Wood Based Panels, Determination of the Density, European Committee for Standardization. Brussels, Belgium.
-Hosseinzadegan, A., 2016. Study of graphene-based structures using micro Raman spectroscopy. Laser and Plasma Research Institute, Fotonic Master's Thesis, Shahid Beheshti University, Tehran.
-International Agency for Research on Cancer (IARC), Formaldehyde, 2-butox-yethanol and 1-tert-butoxy-propanol, World Health Organization, Lyon, France,2006.
-Iranian Employers Association of Forest Products, 2018. Information excerpts from the global and national market for wood composites, http://www.iranwoodind.com/main_fa.asp?status=statistics.
-ISO 12460-4. 2014. Wood-based panels. Determination of formaldehyde Release, Part 4: Desiccator method, Austrian Standards Institute, Austria.
-Kumar, A., Gupta, A., Sharma, K.V., Nasir, M. and Ahmad Khan, T., 2013. Influence of activated charcoalas filler on the properties of wood composites. International Journal of Adhesion and Adhesives, 46: 34-39.
-Kumar, A., Gupta, A. and Sharma, K.V., 2014. Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT. Holzforschung, 69(2): 199-205.
-Lee J H & Kim S., 2010. The Confirmation of the Adsorption Performance of Graphite for VOCs and Basic Science Research. Program through the National Research Foundation of Korea (NRF) The Ministry of Education, Science and Technology.
-Lin, H., Chen, D., Liu, H., Zou, X. and Chen, T., 2017. Effect of MnO2 Crystalline Structure on the Catalytic Oxidation of Formaldehyde. Aerosol Air Qual Res, 17: 1011-1020,
https://doi.org/10.4209/aaqr.2017.01.0013
-Salthammer, T., Mentese, S. and Marutzky, R., 2010. Formaldehyde in the Indoor Environment. Chem Rev, 110, P: 2538 Building and Environment, 150: 219-232.
-Shabani Navir, N., 2013. Modified activated carbon effect on formaldehyde emission from particle board, M.Sc thesis, Tehran University.
-Sekine, Y., 2002. Oxidative decomposition of formaldehyde by metal oxide at room temperature. Atmospheric Environment, 36:5543–7.
-Schwarz, J.A., Contescu, C. and Contescu, A., 1995. Methods of preparation of catalyticmaterials, Chemical Reviews, 95:477–510.
-Saroyan, H., Kyzas, G Z. and Deliyann, E.A., 2019. Effective Dye Degradation by Graphene Oxide Supported Manganese Oxide, Processes, 7 (40), doi: 10.3390 / pr7010040.
-Spengler, J.D., Samet, J.M., McCarthy, J.F., 2001. Indoor air quality handbook. McGraw-Hill Companies, Inc, New York.
-Tsai, K., Kuan, H.C., Chou, H.W., Kuan, C.F., Chen, C.H. and Chiang, C.L., 2011. Preparation of expandable graphite using a hydrothermal method and flame-retardant properties of its halogen-free flame-retardant HDPE composites. J Polym Res, 18: 483–488, DOI 10.1007/s10965-010-9440-2.
-
Wang, J. and Zhang, P., 2015. Room-Temperature Oxidation of Formaldehyde by Layered Manganese Oxide: Effect of Water. Environ Sci Technol, 49 (20): 12372–12379.
-World Health Organization WHO 2010, Guidelines for Indoor Air Quality: SelectedPollutants, WHO Regional Office for Europe, Copenhagen.
-Younesi, H., Kazemi Najafi, S. and Behroz, R., 2016. Influence of nanoclay on physiochemical, thermal and structural properties of urea formaldehyde resin. Journal of Forest and Wood Product (Iranian Journal of Natural resources), 69(3): 561-570.
- Zhou, L., He, J., Zhang, J., He, Z., Hu, Y., Zhang, C., and He, H., 2011. Facile In-Situ Synthesis of Manganese Dioxide Nanosheets on Cellulose Fibers and their Application in Oxidative Decomposition of Formaldehyde. The Journal of Physical Chemistry C, 115 (34): 16873-16878, DOI: 10.1021/jp2050564.
)