-Barnnet j.R., and Jeronimidis, G., 2003. Wood Quality and Its Biological Basis. Blackwell Scientific Publisher, Oxford, 226p.
-Bieker, D. and Rust, S., 2010. Non-destructive estimation of sapwood and heartwood width in Scots pine (Pinus sylvestris L.). Silva Fennica, 44(2): 267-273.
-Brancheriau, L., Saadat-Nia, M.A., Gallet, P., Lasaygues, P., Pourtahmasi, K. and Kaftandjian, V., 2012. Ultrasonic imaging of reaction wood in standing trees. Acoustical Imaging, Springer, 31(5): 399-411.
-Bucur, V., and Chivers, R.C., 1991. Acoustic properties and anisotropy of some Australian wood species. Acta Acustica United with Acustica, 75(1): 69-74.
-Bucur, V., 2006. Acoustic of Wood. Springer Series in Wood Science, 387p.
-Bucur, V., 2010. Acoustic tomography for tension wood detection in eucalypts: 255-268. In: Bucur, V., (Eds.). Delamination in Wood, Wood Products and Wood-Based Composites. Springer, Heidelberg, 401p.
-Du, X., Li, S., Li, G., Feng, H. and Chen, S., 2015. Stress wave tomography of wood internal defects using ellipse-based spatial interpolation and velocity compensation. BioResources, 10(3): 3948-3962.
-Fundova, I., Funda, T. and Wu, H.X., 2018. Non-destructive wood density assessment of Scots pine (Pinus sylvestris L.) using Resistograph and Pilodyn. PloS One, 13(9): 1-16.
-Goncz, B., Divos, F. and Bejo, L., 2017. Detecting the presence of red heart in beech (Fagus sylvatica) using electrical voltage and resistance measurements. Springer, 76(2): 679-686.
-Green D., Winandy J. and kretschmann D., 1999. Mechanical properties of wood: 100-146. In: Department of Agriculture., (Eds.). Wood Handbook, Wood as an Engineering Material. Forest Service, United States, 509p.
-Johnstone, D., Moore, G., Tausz, M. and Nicolas, M., 2010. The measurement of wood decay in landscape trees. Arboriculture & Urban Forestry, 36(3): 121-127.
-Kasal, B., Lear, G. and Tannert, T., 2011. Stress Waves: 5-24. In: kasal, B. and Tannert, T., (Eds.). In Situ Assessment of Structural Timber. Springer, Berlin, 123p.
-Kazemi-najafi, S., 2016. Nondestructive evaluation of standing trees. Tarbiat modares university press, Tehran, 436p.
-Li, L., Wang, X., Wang, L. and Allison, R.B, 2012. Acoustic tomography in relation to 2D ultrasonic velocity and hardness mappings. Wood Science and Technology, 46(1-3): 551-561.
-Liang, S. and Fu, F., 2012. Strength loss and hazard assessment of Euphrates poplar using stress wave tomography. Wood and Fiber Science, 44(1): 54-62.
-Nia, M.A.S., Enayati, A.A., Brancheriau, L. and Pourtamasi, K., 2012. Investigation the acoustic behavior of poplar and spruce species reaction wood using ultrasonic technique. Iranian Journal of Wood and Paper Science Research, 27(2): 306-318.
-Ostrovský, R., Kobza, M. and Gažo, J., 2017. Extensively damaged trees tested with acoustic tomography considering tree stability in urban greenery. Springer, 31(3): 1015-1023.
-Roohnia, M., Jahan latibari, A., Behzad, B., Zarrinmehr, J., Kohantorabi, M., Manouchehri, N. and Tajdini, A., 2017. Development of tomographic technology (case study: trees from Karaj city). Iranian Journal of Wood and Paper Science Research, 33(1): 100-111.
-Saadat Nia, M.A., Brancheriau, L., Enayati, A.K., Pourtahmasi, K. and Honarvar, F., 2011. Ultrasonic wave parameter changes during propagation through poplar and spruce reaction wood. Bioresources, 6(2): 1172–1185.
-Schubert, S., Gsell, D., Dual, J., Motavalli, M. and Niemz, P., 2009. Acoustic wood tomography on trees and the challenge of wood heterogeneity. Holzforschung, 63(1): 107-112.
-Wang, X., Allison, R.B., Wang, L. and Ross, R.J., 2007. Acoustic tomography for decay detection in red oak trees. Department of Agriculture, Forest Service, Forest Products Laboratory. 642: 1-7.
)