-Assor, C., Placet, V., Chabbert, B., Habrant, A., Lapierre, C., Pollet, B. and Perre, P., 2009. Concomitant changes in viscoelasticity properties and amorphous polymers during the hydrothermal treatment of hardwood and softwood. J. Agric. Food. Chem, 57: 6830–6837.
-Biswas, A.K., Yang, W. and Blasiak, W., 2011. Steam pretreatment of salix to upgrade biomass fuel for wood pellet production. Fuel Process Technol, 92: 1711–1717.
-
Bodig, J. and
Jayne, B.A., 1982. Mechanics of wood and wood composits.The University of Michigan, 712 pages.
-Dioufa, P.N., Stevanovicb, T., Cloutierb, A., Fangb, C.H., Blanchetc, P., Koubaad, A. and Mariottib, N., 2011. Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers, Applied Surface Science, 257: 3558–3564.
-Gardner, D.J., Generalla, N.C., Gunnells, D.W. and Wolcott, M.P., 1991.Dynamic Wettability of Wood. Langmuir, 7: 2498–2502.
-Gindl, M., Sinn, G., Reiterer, A. and Tschegg, S., 2001. Wood Surface Dependence of Wettability: A Comparison of Different Wood Surfaces Using an Acid-Base Approach, Holzforschung, 55: 433–440.
- Hajihassani, R., Mohebby, B., Kazemi-Najafi, S. and Navi, P., 2017.Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood.Iranian Journal of Wood and Paper Science Research. Vol. 32, No. (1): 1-12.
-Jennings, J.D., Zink-Sharp, A., Frazier, C.E. and Kamke, F.A., 2006. Properties of compression densified wood, Part II, Surface Energy, J. Adhes. Sci. Technol, 20 (4): 335–344.
-Lam, P.S., 2011. Steam Explosion of Biomass to Produce Durable Pellet. Ph.D. Dissertation.The University of British Columbia, Vancouver, Canada.
-Lam, P.S., Lam, P.Y., Sokhansanj, Sh., Bi, X.T. and Lim, C.J., 2013. Mechanical and compositional characteristics of steam-treated douglas fir (Pseudotsugamenziesii L.) during pelletization. Biomass and Bioenergy, 56: 116-126.
-Mirzaei, Gh.,Mohebby, B. and Tasooji, M., 2012. The effect of hydrothermal treatment on bond shear strength of beech wood. Eur. J. Wood Prod, 70: 705-709.
-Mohebby, B., Sharifnia-Dizboni, H. and Kazemi-Najafi, S., 2009. Combined hydro-thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification. In: Proceeding of 4th European Conference on Wood Modification (ECWM4). 27-29th April, Stockholm, Sweden, pp. 353-360.
-Navi, P. and Sandberg, D., 2011. Thermo-hydro-mechanical processing of wood, Engineering Sciences, Taylor & Francis Group, LLC, Swiss, p. 360.
-Ramos, L.P., 2003. The Chemistry Involved in the Steam Pretreatment of Lignocellulosic Materials. Quim Nova 26, 863–871.
-Rowell, R.M., 2005. Handbook of Wood Chemistry and Wood Composites. chapter 11: Chemistry of Wood Strength, 432-435.
-Surface Texture: Profile method rules and procedures forthe assessment of surface texture, 1:1158-1159, ISO/DIS 4287.1. 1998
- Taghiyari, H.R., Bayani, S., Militz, H. and Papadopoulos, A.N., 2020. Heat Treatment of Pine Wood: Possible Effect of Impregnation with Silver Nanosuspension. Forests. 11(4):466.
-Taghiyari, H.R., Enayati, A. and Gholamiyan, H., 2013. Effects of nano-silver impregnation on brittleness, physical and mechanical properties of heat-treated hardwoods. Wood Sci Technol. 47, 467–480.
-Tsoumis, G., 1991. Science and Technology of Wood.Structure, Properties, Utilization. Van Nostrand Reinhold, New York. pp. 494.
)