هیچ چیز ارزشمند آسان بدست نمی آید.

نوع مقاله : مقاله پژوهشی

نویسندگان

گروه صنایع چوب و کاغذ، واحد چالوس، دانشگاه آزاد اسلامی، چالوس، ایران

چکیده

سابقه و هدف: صنوبر تبریزی به دلیل رشد سریع و دسترسی آسان، به­عنوان یکی از گزینه‌های مناسب به‌منظور تأمین مواد اولیه صنایع برای جنگل­کاری مطرح است. ازاین‌رو، این تحقیق باهدف بررسی و مقایسه ویژگی‌های فیزیکی، آناتومی و ترکیب شیمیایی چوب تنه و شاخه صنوبر تبریزی و روند تغییرات آنها در طول شاخه انجام شد.
مواد و روش‌ها: بدین منظور نمونه­های چوبی از قسمت تنه و سه شاخه در طول آن تهیه شدند و مقادیر طول الیاف، قطر الیاف، ضخامت دیواره سلولی، قطر حفره سلولی، ضرایب بیومتری، قطر آوندها، دانسیته چوب، لیگنین، سلولز، مواد استخراجی در آب گرم و مواد استخراجی در الکل استن اندازه­گیری گردیدند.
نتایج: نتایج نشان داد که اختلاف میان تنه و شاخه در همه ویژگی‌های اندازه­گیری شده کاملاً معنی‌دار است. الیاف تنه ازنظر طول، قطر و ضخامت دیواره دارای مقادیر بیشتری بوده و بلوغ آناتومیکی بالاتری را نشان می‌دهند، درحالی‌که شاخه باوجود الیاف کوچک‌تر، دارای نسبت درهم‌رفتگی و رانکل بالاتری بود. البته روند تغییرات ابعاد الیاف در محور طولی شاخه کاهش محسوسی نشان ­می­دهد. دانسیته شاخه به‌طور محسوسی بیشتر از تنه اندازه‌گیری شد و قطر آوندها در تنه نسبت به شاخه بزرگ‌تر بوده و روند تغییرات آن در طول شاخه نزولی است. ازنظر ترکیب شیمیایی نیز درصد سلولز، لیگنین و مواد استخراجی در چوب تنه بالاتر بود و این مقادیر در محور طولی شاخه به‌طور یکنواخت کاهش یافت.
نتیجه ­گیری: یافته ­ها نشان داد که چوب تنه به دلیل بلوغ ساختاری و مقادیر بیشتر اجزای لیگنوسلولزی، ماده اولیه مناسب‌تری برای کاربردهای چوبی و کاغذی باکیفیت بالا محسوب می‌شود؛ اما چوب شاخه نیز با داشتن دانسیته بالاتر، ضرایب کاغذسازی قابل‌قبول و الیاف مناسب، می‌تواند به‌عنوان یک منبع اقتصادی و در دسترس در تولید خمیرکاغذ مورد استفاده قرار گیرد. این نتایج نقش قابل‌توجه شاخه‌ها را در افزایش بهره‌وری مواد خام و مدیریت پایدار منابع چوبی برجسته می‌سازد. 

کلیدواژه‌ها

موضوعات

-Bektas, I., Tutus, A. & Eroglu, H., 1999. A study of the suitability of Calabrian pine (Pinus brutia Ten.) for pulp and paper manufacture. Turk Journal of Agriculture and Forestry, 23, 589–599.
-Benetka, V., Bartáková, I. & Mottl, J., 2002. Productivity of Populus nigra L. ssp. nigra under short-rotation culture in marginal areas. Biomass and Bioenergy, 23(5), 327–336. https://doi.org/10.1016/ s0961-9534(02)00065-x
-Bowyer, J.L., Shmulsky, R. & Haygreen, J.G., 2003. Forest products and wood science: An introduction (4th ed.). Blackwell Publishing.
-Carrillo, I., Aguayo, M.G., Valenzuela, S., Mendonça, R.T. & Elissetche, J.P., 2015.Variations in wood anatomy and fiber biometry of Eucalyptus globulus genotypes with different wood density. Wood Research, 60(1), 1–10. https://doi.org/10.1080/ 02773810802607559
-Enayati, A.A., Hamzeh, Y., Mirshokraie, S.A. & Molaii, M., 2009. Papermaking potential of canola stalks. Bioresource, 4(1), 245–256. https://doi. org/10.15376/biores.4.1.245-256
-Efhamisisi, D., 2017. The relationships between fiber dimensions and growth rate in Populus nigra. Journal of Wood and Forest Science and Technology, 23(2), 169-184.‎
-Franklin, G.L., 1945. Preparation of thin sections of synthetic resins and wood-resin composites, and a new macerating method for wood. Nature, 155, 51. https://doi.org/10.1038/155051a0
-Guo, P., Zhao, X., Feng, Q. & Yang, Y., 2023. Branchwood properties of two Tilia species collected from natural secondary forests in northeastern China. Forests, 14(4), Article 760. https://doi.org/10.3390/ f14040760.
-Hakkila, P., 1989. Utilisation of residual forest biomass. Springer Verlag.
-Hilton, M., 2001. Design for sustainable development: Success factors. European Foundation for the Improvement of Living and Working Conditions.
-ISO 3131, 1975. Wood. Determination of density. International Organization for Standardization.
-Johansson, T. & Karačić, A., 2011. Increment and biomass in hybrid poplar and some practical implications. Biomass and Bioenergy, 35(5), 1925–1934. https://doi.org/10.1016/j.biombioe.2011.01. 040
-Jun Ma, Gao, Y., Jiang, T. & Tian, F., 2021. Excellent anti-lung cancer activity of Populus nigra and phylogenetic analysis. Journal of Oleo Science, 70(12), 1783–1789. https://doi.org/10.5650/jos.ess 21220
-Kiaei, M., Tajik, M. & Vaysi, R., 2014. Chemical and biometrical properties of plum wood and its application in pulp and paper production. Maderas. Ciencia y Tecnología, 16(3), 313–322. https://doi. org/10.4067/S0718-221X2014005000024
-Mahdavi, S. & Habibi, M.R., 2004. Comparative investigation on fiber dimensions of trunk and branch wood of Carpinus betulus L. Iranian Journal of Wood and Paper Science Research, 19(2), 243–258. https://sid.ir/paper/109625/en
-Mozafarian, V., 2004. Trees and shrubs of Iran. Farhange Moaser Press.
-Philips, D.R., Clark, A. & Taras, M.A., 1976. Wood and bark properties of southern pine branches. Wood Sci, 8(3), 164–169.
-Oladi, R., Heidari, L., Bagheri, R. & Pourtahmasi, K. 2018. Effect of different irrigation regimes on wood anatomical features and fiber biometry of two elite poplars. Journal of Wood and Forest Science and Technology, 25(2), 153-164.
-Plavcová, L., Gallenmüller, F., Morris, H., Khatamirad, M., Jansen, S. & Speck, T., 2019. Mechanical properties and structure–function trade-offs in secondary xylem of young roots and stems. Journal of Experimental Botany, 70(14), 3679–3691. https://doi.org/10.1093/jxb/erz286
-Riki, J.T.B., Sotannde, O.A. & Oluwadare, A.O., 2019. Anatomical and chemical properties of wood and their practical implications in pulp and paper production: A review. Journal of Research in Forestry, Wildlife & Environment, 11(3), 358-368
-Rowell, R.M., 2012. Handbook of wood chemistry and wood composites (2nd ed.). CRC Press.
-Sabeti, H., 2002. Forests, trees and shrubs of Iran. Yazd University Press.
-San, H.P., Long, L.K., Zhang, C.Z., Hui, T.C., Seng, W. V., Lin, F.S., Hun, A.T. & Fong, W.F., 2016. Anatomical features, fiber morphological, physical and mechanical properties of three-year-old new hybrid Paulownia: Green Paulownia. Research Journal of Forest, 10, 30–35. https://doi.org/10.3923 /rjf.2016.30.35
-Sjöström, E., 1993. Wood chemistry: Fundamentals and applications (2nd ed.). Academic Press.
-Streck, L., Rombauts, S., Jansson, S., Sterky, F., Rouzé, P. & Van de Peer, Y., 2005. EST data suggest that poplar is an ancient polyploid. New Phytologist, 167(1), 165–170. https://doi.org/ 10.1111/j.1469-8137.2005.01378.x
-Vurdu, H. & Bensend, D.W., 1979. Specific gravity and fiber length in European black alder roots, branches and stems. Wood Sci, 12(2), 103–105.