- ASTM D 4541. 2002. Standard Test Method for Pull- Off Strength of Coatings Using Portable Adhesion Testers.
- Bodirlau, R. and Teaca, C.A. 2009. Fourier transform infrared spectroscopy and thermal analyses of lignocellulose fillers treated with organic anhydrides. International Journal of Rom. Journ. Phys. 54(1–2): 93-104.
- Bodirlau, R., Teaca, C.A., Resmerita, A.M. and Spiridon, I. 2012. Investigation of structural and thermal properties of different wood species treated with toluene-2, 4-diisocyanate. International Journal of Cellulose chemistry and technology, 46 (5-6): 381-387.
- Boonstra, M.J. and Tjeerdsma, B.F. 2006. Chemical analysis of heat-treated softwoods. International Journal of Holz als roh und Werkstoff, 64:204-211.
- Coates, J. 2000. Interpretation of Infrared Spectra, a Practical Approach. In: Meyers R, editor. Encyclopedia of Analytical Chemistry. Chichester: John Wiley and Sons, 10815-10837.
- Colom, X., Carrillo, F., Nogues, F. and Garriga, p. 2003. Structural analysis of photo degraded wood by means of FTIR spectroscopy. International Journal of Polymer Degrade. Stab, 80: 543–549.
- Ding, T., Gu, L. and Li, T. 2011. Influence of steam pressure on chemical changes of heat-traded Mongolian pine wood. Journal of Bio Resources, 6(2): 1880-1889.
- Doosthoseini, k., and Moezzipour b. 2011. Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing. Iranian Journal of Wood and Paper Science Research, 26(2): 271-280.
- Ebringerova, A., Heromadkova, Z., Kostalova, Z. and Sasinkova, V. 2008. Chemical valorization of agricultural by-products: isolation and characterization of xylan-based antioxidants from almond shell biomass. International Journal of Bioresources, 3:60-70.
- Edoga, M.O. 2006. Comparative study of synthesis procedures for urea-formaldehyde resins (Part I). Leonardo Electron International Journal of Pract Techno, 72 (1):607-17.
- Charles, R., Frihart, C.R. and Wescott, J.M. 2004. Improved water resistance of bio-based adhesives for wood bonding, In: Jorge, F.E. (Ed.), Proceedings of ICECFOP1 – 1st International Conference on Environmentally-Compatible Forest Products, Oporto, Portugal, September 22–24, p. 293-302.
- Gierlinger, N., Goswami, L., Schmidt, M., Burgert, I., Coutand, C., Rogge, T. and Scwanninger, M. 2008. In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections. International Journal of Biomacromolecules, 9: 2194-2201.
- Kumar, A., Gupta, A., Sharma, K.V., Nasir, M. and Ahamed Khan, T. 2013. Infl uence of activated charcoal as filler on the properties of wood composites. International Journal of Adhesion & Adhesives, 46: 34-3.
- Lee, J., Gwak, K., Park, J., Park, M., Choi, D., Kwon, M. and Choi, I. 2007. Biological pretreatment of softwood pinus densiflora by three white rot fungi. Journal of Microbiology, 45:485-491.
- Leiva, P., Ciannamea, E., Ruseckaite, R.A. and Stefani, P.M. 2007. Medium-density particleboards from rice husks and soybean protein concentrate. International Journal of Applied Polymer Science, 106 (2), 1301–1306.
- Muller, U., Ratzsch, M., Schwanninger, M., Steiner, M. and Zobl, H. 2003. Yellowing and IR-changes of spruce wood as results of UV-irradiatioon. International Journal of photochemistry Photobiology B, Biology, 69: 97-105.
- Nemli, G. 2003. Effects of some manufacturing factors on the properties of particleboard manufactured from alder (Alnus glutinosa subsp. Barbata). Turkish Journal of Agriculture and Forestry, 27 (3), 99-104.
- Okino, E.Y.A., Termeira, D. E. and Menezzi, C.H. S. 2007. Post-Thermal Treatment of oriented strand board (OSB) made from cypress (cupressus glauca lam). Journal of Maderas Ciencia Technological, 3: 199-210.
- Pirayesh, H. and Khazaeian, A. 2012. Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite. International Journal of Composites: Part B, 43(3): 1475-1479.
- Pandey, K.K. and Pitman, A.J. 2003. FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. International Journal of Biodeterior-ation and Biodegradation, 53(3): 151-160.
- Seller, T., George, D. and Smith, W. 2005. Tool wear properties of five extender fillers in adhesive mixes for plywood. International Journal of Forest products journal, 55(3): 27-31.
- Simon, C., George, B. and Pizzi, A. 2002. Copolymerization in UF/PMDI adhesives networks. Journal of Applied Polymer Science,86(14): 3681-3688.
- Sain, M. and Panthapulakkal, S. 2006. Bioprocess preparation of wheat straw fibers and their characterization. Journal of Industrial Crops and Products, 23 (1), 1-8.
- Urrestarazu, M., Martınez, G.A. and Carmen Salas, M.D. 2005. Almond shell waste: possiblelocal rockwool substitute in soilless crop culture. Journal ofScientia Horticulturae, 103 (2005): 453-60.
Veigel, S., Muller, U., Keckes, J., Obersriebnig, M., and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227–1237.
- Widyorini, R., Xu, J., Umemura, K. and Kawai, S. 2005. Manufacture and properties of binder less particleboard from bagasse. I. Effects of raw material type, storage methods, and manufacturing process. Journal of Wood Sci. 51 (6): 648–654.
- Zhand, S., Masoudifar, M., Saraeian, A.R. and Ghasemian, A. 2014. Comparison of hot water and alkaline pre-treatments on the properties of wheat straw NSSC pulp. Iranian Journal of Wood and Paper Science Research, 28(4): 774-794.
- Zhou, D., Zhang, L. and Guo, S. 2005. Mechanisms of lead bio sorption on cellulose/chitin beads. Journal of Water Research, 39(16): 3755 –3762.
)