-Ariafar, A., Samanian, K. and Afsharpour, M., 2015. Optimization of CMC against microorganism factors with nanoparticles Titanium Deoxide using for promotion of this polymer quality protection in restoration of paper document. Ganjineh Asnad Journal, 25(3): 116-140.
-Area, M.C. and Cheradame, H., 2011. Paper aging and degradation: recent findings and research methods. BioResources, 6(4): 5307-5337.
-Barkeshli, M., 2006. Historical and scientific analysis on sizing materials used in Iranian manuscripts and miniature paintings. Ayneye Miras, 15(4): 24-37.
-Barrett, T. and Mosier, C., 1995. The role of gelatin in paper permanence. Journal of the American Institute for Conservation, 34(2): 173-186.
-Biricik, Y., Sonmez, S. and Ozden, O., 2011. Effects of Surface Sizing with Starch on Physical Strength Properties of Paper. Asian Journal of Chemistry, 23(7): 3151-3154.
-Čabalová, I., Kačík, F., Gojný, J., Češek, B., Milichovský, M., Mikala, O., Tribulová, T. and Ďurkovič, J., 2017. Changes in the chemical and physical properties of paper documents due to natural ageing. BioResources, 12(2): 2618-2634.
-Dupont, A., 2002. Study of the degradation of gelatin in paper upon aging using aqueous size-exclusion chromatography. Journal of Chromatography, 950 (4): 113–124.
-Emsley, A.M., Heywood, R.J., Ali, M. and Xiao, X., 2000. Degradation of cellulosic insulation in power transformers. Part 4: Effects of ageing on the tensile strength of paper. IEE Proceedings-Science, Measurement and Technology, 147(6): 285-290.
-Hamzeh, Y. and Rostampour Haftkhani, A., 2008. Principals of Papermaking Chemistry. University of Tehran press, Tehran, 54p.
-Holik, H., 2006. Handbook of paper and board, John Wiley & Sons, 32p.
-Jablonský, M., Katuščák, S., Kačik, F. and Kačiková, D., 2011. Changes in newsprint paper during accelerated ageing. Cellulose Chemistry and Technology, 45(5): 405-411.
-Jonhed, A., 2006. Properties of modified starches and their use in the surface treatment of paper. Karlstad University Studies.
-Lee, H., Shin, J., Koh, CH., Ryu, H., Lee, D. and Sohn, CH., 2002. Surface sizing with cationic starch: its effect on paper quality and papermaking process. Tappi Journal, 1(1): 34-40.
-Pinzari, F., Pasquariello, G. and De Mico, A., 2006. Biodeterioration of Paper: A SEM Study of Fungal Spoilage Reproduced Under Controlled Conditions. Macromolecular Symposia, 238(1): 57-66.
-Rosenau, T., Potthast, A., Krainz, K., Yoneda, Y., Dietz, T., Shields, Z.P.I. and French, A.D., 2011. Chromophores in cellulosics, VI. First isolation and identification of residual chromophores from agedcotton linters. Springer Science Business Media, 18(4): 1623–1633.
-Shen, J., Fatehi, P. and Yonghao N., 2014. Biopolymers for surface engineering of paper-based products. Cellulose, 21(3): 3145–3160.
-Standard test methods for Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min)-Test method. Standard national organization of Iran. 14471-3, 2013.
-Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board, Annual Book of ASTM Standards, 10.01, D 776 – 92, 2001.
-Standard test methods for Paper, board and pulp- Determination of pH of aqueous extracts- Part 1: Cold extraction. Standard national organization of Iran. 3568-1, 2007.
-Standard test methods for Paper-Determination of surface wettability of paper- angle of contact method, Standard national organization of Iran. 17492, 2013.
-Missori, M., Righini, M. and Dupont, A., 2006. Gelatine sizing and discoloration: A comparative study of optical spectra obtained from ancient and artificially aged modern papers. Optics Communications, 263(2): 289–294.
-Zervos, S., 2010. Natural and accelerated ageing of cellulose and paper: A literature review. Cellulose, 9(4): 393-402.
)