-Atar, M. and Özçi, A., 2008. The effects of screw and back panels on the strength of corner joints in case furniture. Materials & Design, 29(2), pp.519-525.
-Bahmani, M., Ebrahimi, G. and Fathi, L., 2009. Predicting of withdrawal strength of dowel joint in medium density fiber (MDF) by mathematic model. Iranian Journal of Wood and Paper Science Research, 24(1):117-124.
-Barick, A.K. and Tripathy, D.K., 2010. Effect of nanofiber on material properties of vapor-grown carbon nanofiber reinforced thermoplastic polyurethane (TPU/CNF) nanocomposites prepared by melt compounding. Composites Part A: Applied Science and Manufacturing, 41(10), pp.1471-1482.
-Eckelman A., Edril, Z. and Zhang J., 2002. Withdrawal and bending strength of dowel joints construction of plywood and oriented strandboard. Forest Products Journal, (52):9-66-74.
-Feng, L., Xie, N. and Zhong, J., 2014. Carbon nanofibers and their composites: a review of synthesizing, properties and applications. Materials, 7(5): 3919-3945.
-Huuml, H., 2010. Strength properties of L-profiled furniture joints constructed with laminated wooden panels. Scientific Research and Essays, 5(6): 545-550.
-Izadi, N., Rashidi, A., Borghei, M., Karimzadeh, R. and Tofigh, A., 2012. Synthesis of carbon nanofibres over nanoporous Ni–MgO catalyst: influence of the bimetallic Ni–(Cu, Co, Mo) MgO catalysts. Journal of Experimental Nanoscience, 7(2):160-173.
-Jahan Latibari, A., Ghofrani, M. and Noori, H., 2005. Investigation the holding strength of dowel joint constructed of particleboard. Journal of Agricultural Sciences. 11(1):135-148.
-Jojibabu, P., Ram, G.J., Deshpande, A.P. and Bakshi, S.R., 2017. Effect of carbon nano-filler addition on the degradation of epoxy adhesive joints subjected to hygrothermal aging. Polymer Degradation and Stability, 140: 84-94.
-Kaboorani, A., Riedl, B. and Blanchet, P., 2013. Ultrasonication technique: a method for dispersing nanoclay in wood adhesives. Journal of Nanomaterials, 2013: 341897.
-Kaboorani, A. and Riedl, B., 2011. Effects of adding nano-clay on performance of polyvinyl acetate (PVA) as a wood adhesive. Composites Part A: Applied Science and Manufacturing, 42(8): 1031-1039.
-Keshtegar, B., Madhoushi, M., Rashidi, A. and Mashkour, M., 2019. The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture. Iranian Journal of Wood and Paper Science Research, 34(2): 242-254.
-Madhoushi, M. and Ansell, M.P., 2017. Effect of glue-line thickness on pull-out behavior of glued-in GFRP rods in LVL: Finite element analysis. Polymer Testing, 62, 196-202.
-Madhoushi, M., 2021. Pull-out strength of glued-in GFRP rods in timber connections by using of epoxy resin reinforced by nanoparticles. Cerne, 27 (1): e-102508.
-Naeimirad, M., Zadhoush, A. and Neisiany, R.E., 2016. Fabrication and characterization of silicocarbide/epoxy nanocomposite using silicon carbide nanowhisker and nanoparticle reinforcements. Journal of Composite Materials, 50(4): 435-446.
-Norhakim, N., Ahmad, S.H., Chia, C.H. and Huang, N.M., 2014. Mechanical and thermal properties of graphene oxide filled epoxy nanocomposites. Sains Malaysiana, 43(4): 603-609.
-Ozkan, T., Chen, Q. and Chasiotis, I., 2012. Interfacial strength and fracture energy of individual carbon nanofibers in epoxy matrix as a function of surface conditions. Composites Science and Technology, 72(9):965-975.
-Parveen, S., Rana, S. and Fangueiro, R., 2013. A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites. Journal of Nanomaterials, 2013.
-Rana, S., Alagirusamy, R. and Joshi, M., 2011. Development of carbon nanofibre incorporated three phase carbon/epoxy composites with enhanced mechanical, electrical and thermal properties. Composites Part A: Applied Science and Manufacturing, 42(5), 439-445.
-Zhang, J. and Eckelman, C.A., 1993. The bending moment resistance of single dowel corner joints in case construction. Forest Products Journal, 43:19-24.
-Zhou, H., 1991. Research on the improvement of water resistance of polyvinyl acetate emulsion. Nianjie,12(4):11–20.
-Zhou, Y., Pervin, F., Rangari, V.K. and Jeelani, S., 2006. Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite. Materials Science and Engineering: A, 426(1-2), 221-228.
-Zhou, Y., Pervin, F., Jeelani, S. and Mallick, P.K., 2008. Improvement in mechanical properties of carbon fabric epoxy composite using carbon nanofibers. Journal of Materials Processing Technology, 198(1-3): 445-453.
)