-Ayrilmis, N., and Winandy, J.E., 2009. Effects of post heat-treatment on surface characteristics and adhesive bonding performance of medium density fiberboard. Materials and Manufacturing Processes, 24:594–299.
-Cyr, P.L, Riedl, B., and Wang, X.M., 2008. Investigation of Urea-Melamine-Formaldehyde (UMF) resinpenetration in Medium-Density Fiberboard (MDF)by High Resolution Confocal Laser Scanning Microscopy, Holz als Roh- und Werkstoff, 66:129–134.
-Doosthoseini, K, Moezzipour, B. 2011. Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing, Iranian Journal of Wood and Paper Science Research, 26(2): 88-93.
-European Standard EN 310. 1993. Wood-based panels.Determination of modulus of elasticity inbending and of bending strength. European Committee for Standardization.
-European Standard EN 312. 2003.Particleboards-Specifications.European Committee for Standardization, Brussels, Belgium.
-European Standard EN 317. 1993. Particleboards and fiberboards, determination of swelling in thickness after immersion. European Standardization Committee, Brussels.
-European Standard EN 319. 1993. Particleboards and fiber-boards.Determination of tensile strength perpendicular to the plane of the board. European Committee for Standardization.
-Geng, X., Zhang, S.Y., and Den, J., 2007. Mill sludge a component of wood adhesive formulation. Holz forschung, 67(6): 688-692.
-Groom, L., Shaler, S., and Mott, L., 1994. Physical and mechanical properties of virgin and recycled woodfibers. In: Proc of environmental quality in wood processing. Atlanta, pp 20–35.
-Gwon, J.G., Lee, S.Y., Chun, S.J., Doh, G.H, and Kim, J.H., 2010. Effects of chemical treatments of hybrid fillers on the physical and thermal properties of wood plastic composites. Composites: Part A, 41:1491–7.
-Hashim, R., Saari, N., Sulaiman, O., Sugimoto, T., Hiziroglu, S., Sato, M., and Tanaka, R., 2010. Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk. Material design, 31:4251–4257.
-Hemmasi, A. H, Samariha, A, Tabei, A.Nemati, M. and Khakifirooz, A., 2011. Study of Morphological and Chemical Composition of Fibers from Iranian Sugarcane Bagasse. American-Eurasian Journal of Agricultural & Environmental Sciences, 11(4):478-481.
-Ince, P., 1994. Recycling and long-range timber outlook. Background research report 1993 RPA, assessment update. USDA Forest Service research paper, FPL-RP-534.
-Kaur, I., Misra, B.N., Sarkar, A., Chauhan, G.S., and Singh, B., 2002. Preparation and characterization of forest waste pine cellulosic fiber—UF resin based polymer composites. Science and Engineering of Composite Materials, 10(6): 437–451.
-Lee, S., Shupe, T.F., and Hse, C.Y., 2005. Mechanical and physical properties of agro-based fiberboard. HolzalsRoh- und Werkstoff, 64:74–79.
-Mantanis, Q., 2004. A new process for recyceling waste fiberboard , 38th international wood composite Symposium.
-Mohebby, B., Ilbeighi, F., and Kazemi-Najafi, S., 2008. Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fiberboard (MDF). HolzalsRoh- und Werkstoff,, 66:213–218.
-Moradi kiya S., 2007. Investigation on possibility of utilization of MDF residues in its manufacturing process. MsC. thesis. University of Tehran . 87pp.
-Ndazi, B., Tesha, J.V., and Nisanda, E.T.N., 2006. Some opportunities and challenges of producing bio-composites from non-wood residues. Journal of Material Science, 41: 6984–90.
-Nonaka, S.h., Umemura, K., and Kawai, S.h., 2013. Characterization of bagasse binderless particleboard manufactured in high-temperature range. Journal of Wood Science, 59:50–56.
-Nourbakhsh, A., Farhani Baghlani, F., and Ashori, A., 2011. Nano-SiO2 filled rice husk/ polypropylene composites: physico-mechanical properties. Industrial CropsandProducts, 33:183–7.
-Pirayesh, H., and Khazaeian, A., 2012. Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite. Composites: Part B, 43:1475–9.
-Roffael, E., 2003. MDF board from recovered OSB. Holzals Roh, 61: 390-391.
-Seller, T., George, D., and Smith, W., 2005. Tool wear properties of five extender fillers in adhesive mixes for plywood. Forest Adhesive Technology. Liberery of congress.
-Serrano, E., and Gustafsson, P.J., 1999. Influence of b ondline brit-tleness a nd defects on the strength of timber finger-joints. International Journal of Adhesion and Adhesives, 19(1): 9 –17.
-Thakur, V. K., and Singha, A. S., 2010. Natural fibres-based polymers—part1 —mechanical analysis of pine needles reinforce d bio composites. Bulletin of Materials Science, 33(3): 257–264.
-Veigel, S., Muller, U., Keckes, J., Obersriebnig, M., and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227–1237.
-Veigel, S., Rathke, J., Weig, M., and Gindl-Altmutter, W., 2012. Particleboard and Oriented StrandBoard Prepared with Nanocellulose-Reinforced Adhesive. Journal of Nanomaterials Article ID 158503, 8 pages.
)